How to Assemble a computer?

Note :
The people who are going to assemble CPU should consider on the following. Until you complete your CPU assembles fully, you should be responsible for CPU without receiving the main power supply. When your CPU gets power supply, it’s very dangerous to touch the assemble parts.
For any reason, you should not touch the power box which is inside the CPU case. Because power box has high voltage, even if there is no power supply. It’s very dangerous for your soul  
Before assemble the computer, you can recognize where the different parts are fixed.

The way of PC Assembling

Take the mother board carefully from the box and keep it in a safe place. Then, take the processor from its box. (Inside the processor box, there will be a processor and a fan)
Take the processor and fix it in the particular place in the mother board.

Next
Open the clip from the place where the processor is fixed and remove the processor cover, as shown in image below.

  

 

 Like this open the area of the fixed processor.

There are two bents in processor and also two bent in mother board, at the place where the processor is kept, connect the bents carefully and fix the processor into mother board.
If any problems in this, the mother board get damage. So be careful of the mother board.

Like the picture shown below fix the processor properly into mother board.

After fixing the processor, close the mother board slot door and lock the processor properly with the clip.

After that fix the processor fan at the top of the processor.

hile fixing the processor fan, you can see a lock like this at the back side of the mother board. This should get locked properly, so consider this also.

 

After, fixing the processor fan properly, also fix the processor fan pins into mother board as shown the below image.

Open the clips and fix the RAM in the particular place as shown in this image.
After fixing RAM in the mother board, press the clips with the hands and lock it.
If the RAM is locked with the clip properly, that mean you have fixed the RAM in the mother board correctly.

After fixing the RAM and the processor in the mother board, fix the mother board in the particular place which is shown by the arrow mark in this image.

Mostly CPU cover consists with power box, so no need to buy a power box separately. Next we are going to see how to supply the power to the mother board parts through this power box. To give power supply to the mother board parts, we should fix the power box pin properly. 

Your power box contains 24 way Connector pins. (The older power box contains only 20 way Connector pins. So that doesn’t suit for the new model mother board)

 

Your mother board contains 24 way pin slot. Connect the power box connector pins to the mother board 24 way pin slot correctly.
(Here I have marked with the red color, so connect correctly in this way as shown in image)

Next, connect the 4 way connector pin which is in power box to the mother board 4 way pin slot correctly. These two connector pins are very important pin types that connect from the power box to the mother board

I have shown you two places to keep your hard disk in CPU cover.
You can use either in any of this 2 way.

Check your hard disk type whether it is IDE or SATA. Select the correct pins and connect the hard disk to the mother board.

 

Then supply power to the hard disk using SMPS.
If your hard disk and DVD player are SATA type and if your power box (FNTS) doesn’t contain SATA type power pins, you have to buy two SATA type pin separately.

 

As I shown in image, remove the front cover of the CPU case and fix the DVD player. Then Connect either SATA pin or IDE pin & SATA power pin properly.

Then, the CPU front cover consists of power SW, reset SW, power LED, HDD LED and speakers. Fix the pins of these in to your mother board properly.

The mother board catalogue contains the details of “How to fix the pins”. If these pins are fixed properly, then only the mother board starts.

Until now the things you have completed

• Fix the processor in the mother board 
• Fix the RAM in the mother board 
• Fix the mother board in the CPU case 
• Fix the hard disk in to CPU case 
• Fix the DVD player in to CPU case 
• Fix the hard disk and DVD player to mother board with IDE or SATA pins 
• How to fix the HDD and power SW pins. 

IDE Type Hard Disk

 

Blue Color box : IDE pin slot
White color box : Power slot

SATA Type Hard Disk 

Every mother board contains a cover plate as shown in the image to fix with CPU case.

If you fix the computer assemble parts in the above mentioned methods, you’ll get a complete CPU. Fix the CPU with power cables and also fix with monitor.

If you have done all the steps correctly, you’ll get a complete computer. Install a operating system as you wish and start the computer.